Openwrt: Difference between revisions
No edit summary |
|||
Line 39: | Line 39: | ||
uci commit dhcp | uci commit dhcp | ||
==Birdge AP== | |||
==Traffic Monitor== | ==Traffic Monitor== |
Revision as of 19:47, 9 August 2018
Failsafe mode
1. Set your PC ip: 192.168.1.2 and subnetmask 255.255.255.0 and gateway 192.168.1.1
2. Power off the router
3. Disconnect the WAN cable
4. Only connect your PC Ethernet cable to ETH0
5. Power On the router
6. Wait for the router to start the boot sequence (SYS LED starts blinking)
7. When SYS LED is blinking, hit restart button (SYS LED will be blink in a faster rate means your router is in failsafe Mode) (you have to hit the button before the router boots)
8. telnet 192.168.1.1
9. run these commands
mount_root ## this remounts your partitions from read-only to read/write mode
firstboot ## This will reset your router after reboot
reboot -f ## And force reboot
Login the web interface using web browser.
mount_root
uci set network.lan.proto=static uci set network.lan.ipaddr=192.168.1.10 uci set network.lan.netmask=255.255.255.0 uci set network.lan.gateway=192.168.1.1 uci set network.lan.dns=8.8.8.8
uci commit dhcp
Birdge AP
Traffic Monitor
opkg install iftop
iftop -i br-lan
OpenVPN
https://wiki.openwrt.org/toh/tp-link/tl-wdr3600
183 209