Fasensor
From Futuragora Wiki
Fasensor é um sensor montado a partir de um arduino, com sensor de temperatura, humidade e pressão atmosférica. Pode consultar o projecto em:
Dados recolhidos: Temperatura, Humidade, Pressão Atmosférica
Componentes
Arduino ethernet
BMP085
DHT11
Fasensor Code
//Fathing2 #include <Wire.h> #include <Adafruit_BMP085.h> #include "DHT.h" #define DHTPIN A1// what digital pin we're connected to // Uncomment whatever type you're using! //#define DHTTYPE DHT11 // DHT 11 #define DHTTYPE DHT11 // DHT 22 (AM2302), AM2321 // Connect VCC of the BMP085 sensor to 3.3V (NOT 5.0V!) // Connect GND to Ground // Connect SCL to i2c clock - on '168/'328 Arduino Uno/Duemilanove/etc thats Analog 5 // Connect SDA to i2c data - on '168/'328 Arduino Uno/Duemilanove/etc thats Analog 4 // EOC is not used, it signifies an end of conversion // XCLR is a reset pin, also not used here DHT dht(DHTPIN, DHTTYPE); Adafruit_BMP085 bmp; #include <SPI.h> #include <Ethernet.h> // Enter a MAC address for your controller below. byte mac[] = { 0xFE, 0xED, 0xCE, 0xEF, 0xCE, 0xED }; //IPAddress server(74,125,232,128); // numeric IP for Google (no DNS) char server[] = "api.thingspeak.com"; // Set the static IP address to use if the DHCP fails to assign IPAddress ip(192,168,1,110); // Initialize the Ethernet client library // with the IP address and port of the server // that you want to connect to (port 80 is default for HTTP): EthernetClient client; #include <Wire.h> void setup() { Serial.begin(9600); if (!bmp.begin()) { Serial.println("Could not find a valid BMP085 sensor, check wiring!"); while (1) {} } while (!Serial) { ; // wait for serial port to connect. Needed for Leonardo only } if (Ethernet.begin(mac) == 0) { Serial.println("Failed to configure Ethernet using DHCP"); // no point in carrying on, so do nothing forevermore: // try to congifure using IP address instead of DHCP: Ethernet.begin(mac, ip); } delay(1000); // give the Ethernet shield a second to initialize: Serial.println("connecting..."); dht.begin(); // if you get a connection, report back via serial: if (client.connect(server, 80)) { Serial.println("conection test"); Serial.println("disconnecting."); client.stop(); } else { Serial.println("connection failed"); // kf you didn't get a connection to the server: } } void loop() { float h = dht.readHumidity(); { if (client.connect(server, 80)) { // sendig data to server // Serial.println("connected send"); client.print("GET https://api.thingspeak.com/update?api_key=6ZRPREC014UE3CG4&"); client.print("field1="); client.print(bmp.readTemperature()); client.print("&&"); client.print("field2="); client.print(bmp.readPressure()); client.print("&&"); client.print("field3="); client.print(dht.readHumidity()); client.println(); client.println(); // disconnecting from server // Serial.println("disconnecting. send"); client.stop(); } else { Serial.println("connection failed"); } } { delay(59550); // 1 mn de delay } }
Code Test sensors
#include <Wire.h> #include <Adafruit_BMP085.h> /*************************************************** This is an example for the BMP085 Barometric Pressure & Temp Sensor Designed specifically to work with the Adafruit BMP085 Breakout ----> https://www.adafruit.com/products/391 These displays use I2C to communicate, 2 pins are required to interface Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit! Written by Limor Fried/Ladyada for Adafruit Industries. BSD license, all text above must be included in any redistribution ****************************************************/ #include "DHT.h" #define DHTPIN A1 // what digital pin we're connected to // Uncomment whatever type you're using! //#define DHTTYPE DHT11 // DHT 11 #define DHTTYPE DHT11 // DHT 22 (AM2302), AM2321 // Connect VCC of the BMP085 sensor to 3.3V (NOT 5.0V!) // Connect GND to Ground // Connect SCL to i2c clock - on '168/'328 Arduino Uno/Duemilanove/etc thats Analog 5 // Connect SDA to i2c data - on '168/'328 Arduino Uno/Duemilanove/etc thats Analog 4 // EOC is not used, it signifies an end of conversion // XCLR is a reset pin, also not used here DHT dht(DHTPIN, DHTTYPE); Adafruit_BMP085 bmp; double Fahrenheit(double celsius) { return 1.8 * celsius + 32; } // fast integer version with rounding //int Celcius2Fahrenheit(int celcius) //{ // return (celsius * 18 + 5)/10 + 32; //} //Celsius to Kelvin conversion double Kelvin(double celsius) { return celsius + 273.15; } // dewPoint function NOAA // reference (1) : http://wahiduddin.net/calc/density_algorithms.htm // reference (2) : http://www.colorado.edu/geography/weather_station/Geog_site/about.htm // double dewPoint(double celsius, double humidity) { // (1) Saturation Vapor Pressure = ESGG(T) double RATIO = 373.15 / (273.15 + celsius); double RHS = -7.90298 * (RATIO - 1); RHS += 5.02808 * log10(RATIO); RHS += -1.3816e-7 * (pow(10, (11.344 * (1 - 1/RATIO ))) - 1) ; RHS += 8.1328e-3 * (pow(10, (-3.49149 * (RATIO - 1))) - 1) ; RHS += log10(1013.246); // factor -3 is to adjust units - Vapor Pressure SVP * humidity double VP = pow(10, RHS - 3) * humidity; // (2) DEWPOINT = F(Vapor Pressure) double T = log(VP/0.61078); // temp var return (241.88 * T) / (17.558 - T); } // delta max = 0.6544 wrt dewPoint() // 6.9 x faster than dewPoint() // reference: http://en.wikipedia.org/wiki/Dew_point double dewPointFast(double celsius, double humidity) { double a = 17.271; double b = 237.7; double temp = (a * celsius) / (b + celsius) + log(humidity*0.01); double Td = (b * temp) / (a - temp); return Td; } void setup() { Serial.begin(9600); if (!bmp.begin()) { Serial.println("Could not find a valid BMP085 sensor, check wiring!"); while (1) {} } } void loop() { Serial.print("Humidity = "); Serial.print(dht.readHumidity()); Serial.println(" *H"); Serial.print("Temperature = "); Serial.print(bmp.readTemperature()); Serial.println(" *C"); Serial.print("Pressure = "); Serial.print(bmp.readPressure()); Serial.println(" Pa"); // Calculate altitude assuming 'standard' barometric // pressure of 1013.25 millibar = 101325 Pascal Serial.print("Altitude = "); Serial.print(bmp.readAltitude()); Serial.println(" meters"); // you can get a more precise measurement of altitude // if you know the current sea level pressure which will // vary with weather and such. If it is 1015 millibars // that is equal to 101500 Pascals. Serial.print("Real altitude = "); Serial.print(bmp.readAltitude(101500)); Serial.println(" meters"); Serial.println(); delay(5000); }
PHP and Mysql
Create a database with three tables: temperature, humidity, pressure. Use the following code:
CREATE TABLE `fasensor7`.`temperature` ( `id` INT( 255 ) NOT NULL AUTO_INCREMENT , `timestamp` VARCHAR( 255 ) NOT NULL , `temperature` VARCHAR( 255 ) NOT NULL , PRIMARY KEY ( `id` ) ) ENGINE = MYISAM ; CREATE TABLE `fasensor7`.`pressure` ( `id` INT( 255 ) NOT NULL AUTO_INCREMENT , `timestamp` VARCHAR( 255 ) NOT NULL , `pressure` VARCHAR( 255 ) NOT NULL , PRIMARY KEY ( `id` ) ) ENGINE = MYISAM ; CREATE TABLE `fasensor7`.`humidity` ( `id` INT( 255 ) NOT NULL AUTO_INCREMENT , `timestamp` VARCHAR( 255 ) NOT NULL , `temperature` VARCHAR( 255 ) NOT NULL , PRIMARY KEY ( `id` ) ) ENGINE = MYISAM ; CREATE TABLE `fasensor7`.`light` ( `id` INT( 255 ) NOT NULL AUTO_INCREMENT , `timestamp` VARCHAR( 255 ) NOT NULL , `pressure` VARCHAR( 255 ) NOT NULL , PRIMARY KEY ( `id` ) ) ENGINE = MYISAM ;
Add 2 files to your server: connect.php and add.php:
<?php include("conec.php"); $link=Conection(); $timestamp=date('Y-m-d H:i:s'); mysql_query("insert into temperature (timestamp,temperature) values ('$timestamp', '".$_REQUEST["temperature"]."')"); mysql_query ("insert into pressure (timestamp,pressure) values ('$timestamp', '".$_REQUEST["pressure"]."')"); mysql_query ("insert into humidity (timestamp,humidity) values ('$timestamp', '".$_REQUEST["humidity"]."')"); mysql_query ("insert into temperature2 (timestamp,temperature2) values ('$timestamp', '".$_REQUEST["temperature2"]."')"); mysql_query ("insert into dew (timestamp,dew) values ('$timestamp', '".$_REQUEST["dew"]."')"); mysql_query ("insert into light (timestamp,light) values ('$timestamp', '".$_REQUEST["light"]."')"); ?>
Code
Libraries
https://github.com/adafruit/Adafruit_Sensor
PHP Code Arduino Mysql
Create Table: