Iteaduino: Difference between revisions
From Futuragora Wiki
Line 84: | Line 84: | ||
digitalWrite(R1, HIGH) | digitalWrite(R1, HIGH) | ||
</pre> | </pre> | ||
[[Category:Projectos_Futuragora]] | [[Category:Projectos_Futuragora]] | ||
fswebcam -r 640x480 --jpeg 85 -D 1 camshot.jpg | |||
apt-get install fswebcam | |||
apt-get install v4l-utils | |||
scp ./camshot.jpg root@10.7.0.1:/home/futuragora/public_html/futurai/opensenses/ms05/ |
Revision as of 22:58, 24 August 2018
https://itead.cc/wiki/Download
https://itead.cc/wiki/Iteaduino_Plus_A10/A20
https://itead.cc/wiki/ITEAD_SDK_Instruction
https://github.com/itead/Segnix
Network problem
Support 1000M-Ethernet This image supports both 100M and 1000M Ethernet. The default set is 1000M-Ethernet. Switch to 100M-Ethernet, the command is
sudo itead-ethernet emac
Switch to 1000M-Ethernet, the command is sudo itead-ethernet gmac
=Iteaduino Code
Relay1
#include <itead.h> int pin=138; int main() { pinMode(138, OUTPUT); digitalWrite(pin, HIGH); }
#include <itead.h> int pin=138; int main() { pinMode(138, OUTPUT); digitalWrite(pin, LOW); }
Blink Test
#include <itead.h> int pin=138; int main() { pinMode(138, OUTPUT); while(1) { digitalWrite(pin, HIGH); delay(1000); digitalWrite(pin, LOW); delay(1000); } }
To use Segnix in Python
Create a new file named blink.py which reads as follow:
- ! /usr/bin/env python
from iteadsdk import * LED = PG9 pinMode(LED, OUTPUT) while True:
digitalWrite(LED, HIGH) delay(1000) digitalWrite(LED, LOW) delay(1000)
#! /usr/bin/env python from iteadsdk import * R1 = PG9 pinMode(R1, OUTPUT) digitalWrite(R1, HIGH)
fswebcam -r 640x480 --jpeg 85 -D 1 camshot.jpg
apt-get install fswebcam apt-get install v4l-utils
scp ./camshot.jpg root@10.7.0.1:/home/futuragora/public_html/futurai/opensenses/ms05/